How to Disinfect High-Touch Areas in Office Bathrooms?

How to Disinfect High-Touch Areas in Office Bathrooms? Regular disinfection cleaning is crucial since it will keep everyone safe by reducing the spread of bacteria, viruses, and other contaminants. In workplaces where several persons may taint surfaces, cleaning particular surfaces more frequently than others is especially important.

These surfaces are referred to as high-touch areas since they are touched often. This article will give tips and methods to disinfect your high-touch office bathroom areas.

Examples of High touch areas in the bathrooms

Bathroom sinks

In offices, we share bathroom sinks, which we may accidentally touch as we wash our hands. This can quickly spread germs which is why you should disinfect them.

Light Switches

Light switches are often overlooked when disinfecting office bathrooms though they are as crucial since they have manual turn on/off, which people have to share.

Door handles

These areas cannot be avoided as you must touch them in and out, requiring regular disinfection.

Bathroom stalls walls

You must pay attention to the walls since they may contain bacteria and germs.

Grab rails

Frequent cleaning of rails with a soft microfiber cloth is advised since harsh cleaners and instruments should be avoided as they cause the rails to rust or bleach.

Dispensers

Office bathroom dispensers with touch features can transfer a lot of dirt and bacteria.

Air dryers

Hot air dryers can spread germs around the office restroom; this is why paper towels are preferred.

Ways to disinfect high-touch areas in office bathrooms

Office bathrooms must be disinfected, especially now that we have an outbreak of diseases like Corona, to avoid its spread. Cleaning works well, but you need to disinfect to ensure the safety of everyone at work. You can safely disinfect office bathrooms using the steps and methods below:

Select the specific disinfectant you need

You need to identify the specific germ before you choose an EPA-certified disinfecting product since the same disinfectant can kill not all hazardous germs.

Use Soap and Water to clean high-touch areas.

Before disinfecting the office bathroom, it is essential to first clean the frequently touched areas with soap and water. You also must ensure that the disinfectant you are using is compatible with the surface you are about to disinfect.

Ensure Proper Ventilation

Please ensure that the office bathroom windows and doors are open when disinfecting, or use an HVAC or fan setting to boost air circulation.

Put on Protective Gear

Check the disinfectant instructions to find the specific protective gear you need to use with the disinfectant. You may be required to wear goggles or gloves to keep your skin and eyes safe in case of any contact with the disinfectant.

Give the disinfectant a wet time

After applying your disinfectant, leave it on high-touch surfaces for more effectiveness. Follow the wet time recommended in the disinfectant directions. The character must remain moist throughout the damp time to eliminate germs.

Store disinfectants carefully

Please make sure that cleaning and disinfection products are used and stored safely, using PPE appropriate for the materials and keeping them in a secure location.

You should be keen on diluted disinfectants.

If the product you use to disinfect office bathroom high-touch areas instructs you to dilute the item, please use room temperature water unless you need to. So that you know, diluted disinfectants only last for a short time.

You can use bleach as a disinfectant.

When using bleach, go for the unscented household bleach options since they have sodium hypochlorite percent of between five and nine. Avoid using bleach products that have a percentage higher or lower than the one mentioned. Use five tablespoons of bleach for every gallon of water at room temperature and four bleach teaspoons for every quart of water at room temperature if there are no diluting instructions for the bleach.

If there are no precise instructions on the bleach direction, you can apply it on the high-touch areas in the office bathroom and only leave it on for one minute. It is recommended that you prepare a bleach solution every day because it loses its effectiveness 24 hrs after diluting.

Label disinfectants

Please label the disinfectants carefully to avoid harm to other people in the office. This will make them accessible easily, and everyone will be safe.

Do not mix detergents.

Mixing detergents should be avoided as it may have dire consequences. Blending detergents can alter their chemical aspects and cause damage to the high-touch surfaces you are cleaning and damage even to you.

Clean up after disinfecting

It is essential to clean your hands with water and soap for twenty seconds once you are disinfecting. This will remove any disinfectant residue present on your hands.

Hiring disinfection services

Alternatively, you can hire disinfection services to clean your office bathroom in high-touch areas. These disinfection services offer deep clean services during off-work hours and even cleaning services during office hours. With disinfection services, you can make disinfection decisions based on your preference, making it very reliable.

Their services are worth it since they can access other areas that can lead to diseases spreading that we may not know about. They are also equipped with tools for the job and have a lot of experience and skills using them. Hiring disinfection services may be the right move, especially in office bathrooms, as they need thorough disinfection.

How to Disinfect High-Touch Areas in Office Bathrooms? – Conclusion

Office spaces are shared by many people who share the washrooms every day. There are specific parts in the bathroom they cannot avoid touching daily, which can quickly spread diseases and germs. With the rise, Corona the pandemic has played a significant role in ensuring a clean working environment to avoid spreading the virus in recent years.

Disinfecting surfaces that are touched a lot is the best way to avoid this, as it removes germs and other contaminants that no person wants to be in any area or home.

When disinfecting surfaces, you should carefully follow the above steps to avoid causing damage, so you should follow everything to the letter. Our guide has provided you with all the tips to successfully disinfect high-touch areas in the office bathroom without harming or damaging anything.